PMI-10S

Campi di applicazione

Luthiers, electronics, woodwork, assembling

Caratteristiche

  • Working pressure from 4 to 9 Bar Max.
  • Complete platform with slots and 4 repositionable suction cups.
  • Platform size: 350 x 320 mm
  • Load capacity 10 kg
  • Working platform with P10S positioner
  • Platform for musical instruments with P10S positioner
  • Platform with guitar
  • Platform with guitar

Model P10S

DMX43 Magneti permanenti piatti gommati

DMX43 RUBBERIZED FLAT PERMANENT MAGNETS

Permanent magnets with high magnetic force and protective rubber coating to hold metal parts without damaging them. Diam. 43 mm with M6 threaded stem.

PMX300 - MAGNETIC PLATFORM

High magnetic power platform for holding even heavy ferromagnetic parts. The force of the magnet can be deactivated using an ON-OFF lever.

VACM-C  MULTI-CLAMP VACUUM PLATFORM

Vacuum clamping plate for holding objects with flat surfaces by means of the vacuum force generated by a Venturi system.

Campi di applicazione

Painting, grinding, sanding, assembling, welding, finishing and manual processing.

Caratteristiche

  • Working pressure from 4 to 9 Bar Max.
  • External cover in painted sheet.
  • Base plate in anodized aluminum.
  • AISI 304 stainless steel platform complete with slots for anchoring clamps.
  • Support platform size: 400 x 310 mm
  • Reach 25 kg

Technical sheet

Use and maintenance manual

Accessories Catalogue

Model P6S

DMX43 Magneti permanenti piatti gommati

DMX43 RUBBERIZED FLAT PERMANENT MAGNETS

Permanent magnets with high magnetic force and protective rubber coating to hold metal parts without damaging them. Diam. 43 mm with M6 threaded stem.

VACM-C  MULTI-CLAMP VACUUM PLATFORM

Vacuum clamping plate for holding objects with flat surfaces by means of the vacuum force generated by a Venturi system.

Campi di applicazione

Painting, grinding, sanding, welding, finishing, manual processing on medium-sized objects.

Caratteristiche

  • Working pressure from 4 to 9 Bar Max.
  • Painted sheet metal outer cover.
  • Anodised aluminium base plate.
  • Equipped platform in AISI 304 complete with slots for anchoring clamps.
  • Support platform size: 240 x 180 mm
  • Load capacity 10 kg

Technical data sheet

Use and maintenance manual

Accessories Catalogue

Model P3X

Manual valve 5-2 bistable complete with fittings

Campi di applicazione

Painting, sanding, tin welding, finishing and small manual processing on small objects.

Caratteristiche

  • Working pressure from 4 to 9 Bar Max.
  • External cover in mirror-polished AISI 304.
  • Black anodised aluminium base plate.
  • AISI 304 platform supplied complete with slots for anchoring clamps.
  • Support platform size: 120 x 90 mm
  • Capacity 800 g

Technical data sheet

Use and maintenance manual

Accessories Catalogue

Information request

Privacy policy
Would you like to subscribe to our Newsletter?
Would you like to receive further guides or business tips by email?

Google reCaptcha: Invalid site key.

CONDITIONS OF SALE

All supplying done by the Seller will be only regulated by the following general Conditions of sales. All the clauses and/or conditions established by the Buyer are not valid when in contrast with the conditions listed hereafter.

1) OFFERS.
Offers’ validity is 30 days except in case of an explicit derogation communicated each time it is necessary. Indications on catalogue, prospects and price lists do not bind the Seller who can decide to modify products and prices. Therefore, the Seller is exclusively bound to what is written in the Confirmation of Order. All catalogue texts have been written with a lot of accuracy in order to guarantee correct data: in spite of that starting to now the Buyer releases the Seller from responsability for any errors or omissions.

2) ORDERS.
The sale contract binds both parties to consider as date of issue the Seller’s Confirmation of Order.

3) PRICES.
Contractual prices are those appearing in the Confirmation of Order and are intended as Sellers’ ex-factory goods. Any sales’ conditions of additional supplying and/or decrease shall be agreed by both parties in writing.

4) DELIVERY TERMS.
a) The delivery terms appearing on the Confirmation of Order are purely as an indication and will be respected as much as possible. b) The Seller is in any case fully entitled not to follow the delivery terms in the following cases.: • When the Buyer has not respected the agreed payment instructions. • In circumstances upon his/her control or potential events such as lock-out and strike or all sort of abstention from work, epidemics, wars, requisitions, floods, manufacturing accidents, transport interruptions or delays. • When the Buyer delays the delivery of the data and/or the material necessary for the supplying execution.

5) SUSPENSIONS AND CANCELLATIONS.
In case of suspension or cancellation of an order by the Buyer, the Seller reserves the right to invoice: A. the manufacturing and the materials’ costs calculated on the basis of the progress of work. The goods will be at Buyer’s disposal while projects and design will be kept by the Seller. B. All sort of charges due to the Buyer’s default.

6) DELIVERIES.
The delivery is considered completed at the moment of the notice that the goods are ready and at the Buyer’s disposal for the pick-up or for the delivery to the carrier. This can be simply done by sending the invoice. If the goods picking-up is delayed, the Seller could provide for the packing, the transport or the storage of the goods at the Buyer’s charge. All this could be done if the delay is due to factors not depending from the Seller’s control, and 8 days after the date of the communication that the goods are ready for the pick-up.

7) PACKING.
The Seller also takes care of the solidity of the protective packaging of its products. Each product has an individual packaging. Due to the composition of the order, the individual products are, if necessary, further repacked and protected during transport. If there isn’t a specific suggestion, the Seller usually set up the best packing at the Buyer’s charge, disclaiming all responsibility. Attention: the packaging of the single product is NOT intended for individual shipment. In case of return of a single package, it is necessary to provide for additional reinforced packaging.

8) PAYMENTS.
Payments have to be done at the Seller’s address and according to the terms and conditions agreed, while a delay in payments entails a charge of the interests on arrears estimated in according to the current regulations. Any claim doesn’t entitle the Buyer to suspend payments. All the advances are interest-free.

9) SHIPMENT.
Every operation of transport, insurance, customs and delivery are at the Buyer’s charge. The Buyer has the duty to check the goods at the moment of the delivery. In case of damages, he could make an appeal against the carrier, even if the goods have been sent carriage forward and the Buyer had the responsibility of the transport.

10) COMPLAINTS.
Possible complaints or objection by the Buyer about the goods supplied have to be brought to the Seller’s notice in writing within 10 days from the date of the delivery and only with write documents by post or by certified e-mail (PEC). The above-mentioned date is prolonged for 10 days if it has been impossible to put the goods to the test before the assembly on more elaborated engines (impossibility that the Buyer has the obligation to prove).

11) GUARANTEE.
The goods produced by the Seller are covered by a warranty valid for 24 months from the date of departure of the product from the PSET factory. The guarantee assures repairs and replacements of faulty products when it is established that the defect is due to an error in planning and/or construction made by the Seller. The guarantee covers all the costs related to the replacement and repair of the faulty product, except for packing and transport costs. Moreover, if the presence of technicians is necessary, the travelling expenses, board and lodging are at the Buyer’s charge. The guarantee lapses when the Buyer carries out every kind of repairs, alterations or changes on the products without a prior written authorisation by the Seller.

12) RESPONSIBILITY FOR DAMAGES.
The seller’s responsibility is strictly limited to the above mentioned obligations. For this reason, every kind of responsibility for damages is excluded, either for missing profit or for accruing damage resulting from the use of products made by the Seller, even when they are later recognised as faulty.

13)PRODUCTS.
The weights, dimensions, and other data indicated by the Seller in catalogs, on the website, in documents, prospectuses, images or whatever, are merely indicative and illustrative. The Seller reserves the right to change the technical or construction data of its products at any time, without notice. The Buyer is responsible for ensuring that the model chosen is suitable for their working environment. The Seller expressly disclaims any liability in this regard.

14) PLACE OF JURISDICTION.
The law court of Pavia has been established as the place of jurisdiction for every kind of dispute between the Seller and the Buyer for problems related to the sale.

15) TRANSFER OF PROPERTY.
According to the art. 1523-4 of the Civil Code, the transfer of property from the Seller to the Buyer occurs only after the entire payment of the price agreed in the Confirmation of Order.

16) ACCEPTANCE OF THE SUPPLYING GENERAL CONDITIONS.
The present supplying general conditions are also readable on our web site www.p-set.com and are considered known and totally accepted from the Buyer at the moment of issuing Purchase Order, even if not signed.

Data processing and privacy policy

Pursuant to Article 13 of the EU Regulation No. 679/2016, General Data Protection Regulation (hereinafter “GDPR”), in relation to the personal data that will come into its possession as data controller, PSET di Fabio Lavelli provides the following information:

  1. Data controller
    The data controller is the company PSET di Fabio Lavelli with registered office in Via Giovanni Alberti n° 42/B, 27053 Lungavilla (PV), in the person of its owner Mr. Fabio Lavelli. For any communication regarding the protection of personal data, the e-mail box is available: info@p-set.com
  2. Personal data
    The personal data, as defined by Art. 4 no. 1) of the GDPR, provided by the user, will be processed in accordance with this information notice and in any case in compliance with the current legislation on the protection of personal data.  
  3. Purposes
    The data provided will be processed, exclusively: for the fulfilment of obligations under laws or regulations to which the Data Controller is subject (Art. 6 letter c) of the GDPR).
  4. Lawfulness of the processing
    Consent to the processing of data for the purposes referred to in point 3.1) above is not required under Art. 6 of the GDPR.
  5. Method of processing
    The data will be processed in the following ways: insertion in the records and database of PSET di Fabio Lavelli; use for communications regarding the activities of PSET di Fabio Lavelli.
    The data will be processed both on paper and electronically, directly by PSET di Fabio Lavelli.
    The data will be stored at the headquarters of PSET di Fabio Lavelli, in such a way as to make access impossible for subjects other than the data controller and those appointed by the same.
    The data may be processed and organised in databases, treated in compliance with the principle of proportionality and in any case for the time necessary to carry out the statutory activities and in any case until the user revokes his specific consent.
  6. Communication of the data
    PSET di Fabio Lavelli, upon specific request, may communicate the data to the competent authorities for the fulfilment of the obligations imposed by the law. 
  7. Retention period
    The data retention period for statutory purposes coincides with the duration of the business relationship, while for the fulfilment of legal obligations the retention period is prescribed by law.
  8. Rights of the data subject
    At any time, the user may exercise his/her rights vis-à-vis the data controller, pursuant to Article 15 et seq. of the GDPR. In particular, every data subject has the right to access personal data, to rectify or erase them or to restrict the processing concerning him or her or to object to their processing, as well as the right to data portability.
    The user also has the right to lodge a complaint with the Data Protection Authority.

 

Support request

Please state which model or accessory you own
How do you wish to be contacted?
privacy policy
Would you like to subscribe to our Newsletter?
Would you like to receive further guides and commercial suggestions by email?

Google reCaptcha: Invalid site key.

Quotation Request

In which product are you involved?
Privacy policy
Would you like to subscribe to our Newsletter?
Would you like to receive further guides or business tips by email?

Google reCaptcha: Invalid site key.